Get Instant Quote

★ SERVING RICHMOND HILL, ON

Epoxy Flooring in Richmond Hill

Epoxy flooring in Richmond Hill for garages, basements and commercial units, from Mill Pond through to Oak Ridges. Full diamond grinding and moisture testing on every slab, with a free on-site estimate.
Get Your Free Estimate
CALL (647) 220-0010

Richmond Hill sits about fifteen minutes from our Markham base, and it’s one of the busiest parts of our service area. We install garage, basement, and commercial floors from the older streets around Mill Pond and the Yonge Street corridor through to the newer subdivisions in Jefferson, Oak Ridges, and Bayview Hill.

One thing worth knowing about this city: the housing stock spans decades. A 1970s garage slab and a 2018 garage
slab need very different amounts of preparation, and that difference shows up in the quote. It’s why we always come
out and look rather than pricing over the phone.

OUR SYSTEMS

Epoxy Flooring Systems We Install in Richmond Hill

Three systems, priced per square foot and installed to the same standard. Which one fits comes down to whether your floor needs grip, needs to hide everyday mess, or is meant to be looked at.

Metallic

Metallic Epoxy Flooring | $11 to $20+ per sq ft

Reflective, marbled, one-of-a-kind. Popular in Bayview Hill and Oak Ridges garages and in finished basement bars and theatres.
See Metallic Epoxy Flooring

Flake

Flake Epoxy Flooring | $7 to $9 per sq ft

Coloured epoxy base with a full vinyl flake broadcast and a polyaspartic topcoat. Textured, hardwearing and forgiving of the dust and salt a Richmond Hill garage collects over a winter. Our most popular residential choice.
See Flake Epoxy Flooring

Quartz

Quartz Epoxy Flooring | $8 to $11 per sq ft

Mineral quartz aggregate broadcast into epoxy for genuine slip resistance and heavy-duty wear. The right system for commercial kitchens, clinics, gyms and workshops along Elgin Mills and the Yonge corridor.
See Quartz Epoxy Flooring
Compare all three systems side by side
WHY LOCAL

Why Richmond Hill Properties Benefit From a Coated Floor

Richmond Hill’s housing stock spans decades, so what a floor needs here depends heavily on when the house was built. These four points cover what comes up most in this city.

Older slabs are usually the ones that need it most

Established Richmond Hill neighbourhoods have garage floors that have taken thirty or forty years of salt and freeze damage without ever being sealed. They pit, dust and spall. Most are still entirely recoverable, because grinding, crack repair and patching bring the surface back before coating.

Basement finishing is common, and moisture testing matters

Finished basements are the norm here, and a seamless floor handles humidity with no seams or grout lines for damp to collect in. We test every basement slab for vapour transmission before quoting. Coating a slab that is pushing moisture upward is the fastest route to blistering.

Salt, slush and a long winter

Every Richmond Hill garage floor spends four or five months a year absorbing salt brine off vehicle tires. Sealed concrete absorbs nothing at all. That is the practical case for coating, before you get anywhere near how it looks.

Commercial spaces along the corridors

Retail units, clinics, studios and light industrial space along Yonge Street, Elgin Mills and Highway 7 need floors that survive constant foot traffic and clean up quickly. Same preparation standard as residential, and we can phase larger projects around your operating hours.

SCHEDULING

Booking a Richmond Hill Project

Richmond Hill is about fifteen minutes from our Markham base, so we can usually offer a choice of dates. Here is how a project runs from first call to parking on it.

Free inspection

Short drive from our base, so dates are generally easy to offer.

Slab assessment first

The age of your concrete decides the prep, which is why we never price by phone.

On-site two to three days

Typical for a residential garage or basement

Walkable in about 24 hours

Light foot traffic the day after the topcoat.

Vehicles in three to seven days

Full cure before anything heavy goes on it.

Working to a deadline?

Move-in date, renovation schedule or reopening- tell us, and we will be honest about it.

Testimonials

What GTA Homeowners Say

“The diamond-grinding prep alone was worth it — our garage floor looks like a showroom and the tires haven’t left a mark.”

Mark R.

Richmond Hill, ON

“North King explained the moisture barrier issue our old contractor never mentioned. Two years later, zero bubbling.”

Priya S.

Markham, ON

“Quoted, ground, coated, and cured in under a week. The quartz finish handles our workshop traffic without a scratch.”

Dave K.

Vaughan, ON

Read more on About Us

Get a Free Estimate for Your Richmond Hill Property

Moisture testing, concrete assessment, samples in your own space and a detailed written estimate. Free, with no obligation.
CALL (647) 220-0010
Contact Us
WhatsaApp Us
FAQ

Frequently Asked Questions

My house is from the 1970s. Is the garage slab too old to coat?
Almost never. Older Richmond Hill slabs around Mill Pond and the Yonge corridor have often taken thirty or forty years of salt and freeze damage without ever being sealed, which leaves them pitted and dusting. Grinding takes that damaged layer off and repairs rebuild the profile. Most of them are entirely recoverable.
Usually because the slabs are different ages. Richmond Hill’s housing stock spans decades, so two garages a few streets apart can need very different amounts of preparation. Newer concrete needs grinding and little else. Older concrete needs grinding plus crack repair and patching. That is preparation time, and preparation time is most of the price.
After framing, drywall, mudding and painting are done, and before anything gets installed at floor level. Coating early means it takes the abuse of the whole rest of the build. Coating too late means working around cabinetry and fixtures. Tell us your renovation schedule and we will slot into it.
Every one, before quoting a system. Coating a slab that is pushing vapour upward without a barrier primer is the fastest route to a blistered floor, and it is the failure we are most often called in to fix. Basements are also where high readings turn up most often, so it is not a step worth skipping here.
Usually, Richmond Hill is a short drive from our Markham base so we can generally offer a range of dates. Say the deadline out loud when you call rather than after we quote. If it is not achievable we would rather tell you at that point than commit and let you down.
Yes. Retail units, clinics, studios, service shops and light industrial space along Yonge Street, Elgin Mills and Highway 7 are regular work for us. Commercial projects get the same preparation standard as residential, and we can phase larger floors around your operating hours.
See all epoxy flooring FAQs