Get Instant Quote
★ Strength. Style. Durability.

Epoxy Flooring in Aurora, Ontario

Epoxy flooring in Aurora, Ontario for garages, basements and commercial units. Damaged slabs resurfaced, sound slabs sealed before the damage starts, both with full diamond grinding and a free on-site estimate.
GET INSTANT QUOTE
CALL (647) 220-0010
Epoxy Systems
0
Floors Installed
0 +
Years Experience
0 +
Satisfaction
0 %

Aurora is a town of two halves when it comes to concrete. The established neighbourhoods around Yonge Street, Town Park, Aurora Heights and Regency Acres have garage slabs that have been through decades of salt and freeze cycles without ever being sealed. The newer developments on the east side and out toward Bayview have slabs in good shape that are worth protecting before the damage starts.

We work on both, and the approach is genuinely different.

OUR SYSTEMS

Epoxy Flooring Systems We Install in Aurora

Three systems, all built to the same thickness over fully ground concrete. On Aurora’s older slabs, the preparation underneath matters more to how the floor ends up than which of the three you choose.

Metallic

Metallic Epoxy Flooring | $11 to $20+ per sq ft

A reflective, marbled, three-dimensional finish for feature garages and finished basements.
See Metallic Epoxy Flooring

Flake

Flake Epoxy Flooring | $7 to $9 per sq ft

Coloured epoxy base, full vinyl flake broadcast, polyaspartic topcoat. Textured, durable and forgiving of everyday mess. The most popular residential system in Aurora.
See Flake Epoxy Flooring

Quartz

Quartz Epoxy Flooring | $8 to $11 per sq ft

Quartz aggregate for maximum slip resistance and heavy-duty wear. Suited to commercial units, clinics, studios and workshops.
See Quartz Epoxy Flooring
Compare all three systems side by side
WHY LOCAL

Why Aurora Homeowners Coat Their Concrete

Aurora splits neatly into older slabs that need rescuing and newer slabs worth protecting now. These four points cover both sides of that, because the right approach is genuinely different.

Older garage slabs can usually be saved

Dusting, pitting and flaking at the surface is salt damage, and it is common across Aurora's older neighbourhoods. Most of these slabs are still recoverable. Grinding removes the damaged layer, patching rebuilds the profile and the coating seals it. Replacing the slab is rarely necessary.

New builds are worth sealing early

If your slab is only a few years old and still sound, coating it now is the cheapest it will ever be. There is no damage to repair, so preparation is straightforward and the job moves faster. You are paying for the floor rather than for fixing the floor first.

Basements that stay dry and clean

A seamless epoxy or flake basement floor handles humidity, wipes clean, and has no grout lines or seams for damp to collect in. Popular for gyms, rec rooms and workshops. We test basement slabs for moisture first, because that is where high readings turn up most often.

A long winter on the north end of the region

Aurora sits far enough north in York Region to get a genuinely long salt season. Four or five months of brine coming off tires onto an unsealed floor does cumulative damage every year. Sealed concrete does not absorb any of it.

SCHEDULING

Booking an Aurora Project

Aurora is part of our regular York Region route, so inspections are straightforward to arrange. Timelines here depend mostly on how much repair your slab needs.

Free inspection

On our standing York Region route alongside Newmarket and Richmond Hill.

The slab condition sets the schedule

Resurfacing adds preparation time on day one rather than a whole extra stage.

On site for two to three days

Typical for a residential garage or basement.

Walkable in about 24 hours

Light foot traffic the day after the topcoat.

Vehicles in three to seven days

Full cure first, which matters most on a resurfaced floor.

Winter installation available

Conditions are controlled on site and cure times run at the longer end.

Testimonials

What GTA Homeowners Say

“The diamond-grinding prep alone was worth it — our garage floor looks like a showroom and the tires haven’t left a mark.”

Mark R.

Richmond Hill, ON

“North King explained the moisture barrier issue our old contractor never mentioned. Two years later, zero bubbling.”

Priya S.

Markham, ON

“Quoted, ground, coated, and cured in under a week. The quartz finish handles our workshop traffic without a scratch.”

Dave K.

Vaughan, ON

Read more on About Us

Get a Free Estimate for Your Aurora Property

Moisture testing, a full assessment of your concrete, samples in your own lighting and a detailed written estimate. Free, with no obligation.
CALL (647) 220-0010
Contact Us
WhatsaApp Us
FAQ

Frequently Asked Questions

Do you serve Aurora, Ontario?
Yes. We are a Markham based contractor and Aurora, Ontario sits on our regular York Region route, alongside Newmarket and Richmond Hill. If you have landed here looking for Aurora in Colorado, Illinois or Ohio, this is not the right company.
Almost certainly not, and this is the most common enquiry we get from Aurora’s older neighbourhoods around Yonge Street, Town Park, Aurora Heights and Regency Acres. Dusting and pitting are surface salt damage. Grinding removes that damaged layer, patching rebuilds the profile, and the coating seals it. Replacing the slab is rarely necessary.
A weak, dusty surface layer on concrete that has been breaking down, usually accelerated by years of road salt. It is why unsealed garages seem to generate dust endlessly no matter how often they are swept. Grinding takes that soft layer off entirely and exposes sound concrete underneath, which is where the coating then bonds.
The opposite. Coating a sound slab now is the cheapest it will ever be, because there is no damage to repair and preparation is straightforward. You are paying for the floor rather than for fixing the floor first. New builds on Aurora’s east side and out toward Bayview are ideal candidates.
More than coating a sound slab, because preparation takes longer. Far less than pouring new concrete. Grinding, crack filling and patching add time to day one rather than adding a whole extra stage, so a resurfacing project still finishes in days rather than the weeks a replacement would take.
It lengthens the salt season, which is the thing actually damaging your concrete. Aurora sits far enough north in York Region to get four or five months of brine coming off tires onto the floor. A sealed surface does not absorb any of it, which is the practical case for coating before you get to how it looks
See all epoxy flooring FAQs